Axminster Engineer Series Bedieningshandleiding - Pagina 4
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Axminster Engineer Series. Axminster Engineer Series 20 pagina's. Pillar drill
Ook voor Axminster Engineer Series: Originele handleiding (16 pagina's), Originele handleiding (16 pagina's), Originele handleiding (19 pagina's), Originele handleiding (18 pagina's)
Pagina afdrukken
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT OPERATE THE TOOL!
Grounding Instructions
This machine has a three-prong plug, the third prong is the ground. Plug this cord
only into a three-prong receptacle. Do not attempt to defeat the protection the ground wire
provides by cutting off the round prong. Cutting off the ground will result in a safety hazard
and void the warranty.
DO NOT MODIFY THE PLUG IN ANY WAY. IF YOU HAVE ANY DOUBT, CALL A
QUALIFIED ELECTRICIAN.
Specification：
Max. drilling capacity:
Max. tapping capacity:
End mill capacity
Face mill capacity
Throat
Max. distance spindle to table
Spindle taper
Spindle speed
Table effective size
T-slot size
Table longitudinal travel (X)
Cross travel (Y)
Headstock travel (Z)
Power
Overall dimension (L*W*H)
Packing size (L*W*H)
Weight (Net/Gross)
Unpacking & Preparing for Use
Before unpacking you must check the package carefully, to find whether it is damaged
and any may have effect on the machine, please connect with the distributor in advance.
Unpacking carefully, check the species of standard accessories and the quantity to find
whether it is as same as the packing list in the package.
Choice of MT#3 or R8
3
20 mm
12 mm
16 mm
50 mm
190 mm
370 mm
100-2000 rpm ±10%
595x140 mm
12 mm
395 mm
190 mm
290 mm
750 W
725*620*880 mm
840*760*1060 mm
101 / 135 Kg