Axminster BS100 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Axminster BS100. Axminster BS100 17 pagina's. Belt sander

1

Description and main features

1.1 Forward

The instruction provides the caution proceeding, operation and services instruction for belt
grinder including the following models: JSG75, JSG75A, JSG100, JSG100A, JSG150,
JSG150A, JSG220 and JSG220A.
The incorrect operation and services may cause accidents. Before using the machine,
user should read the operation manual carefully; understand all markings and instructions
in order to protect himself and the machine rightly. Install, use and maintain the machine
according to the requirement of the instruction. The manufacturer declines all
responsibility for damage caused by negligence and/or the non-observance of the
instructions described in the instruction.
Please hand on the operation manual to the end user, and the user should be trained to
use the machine before using.
In order to explain the special instructions of the machine, some figures in the manual are
incomplete. But the operator must remember that place all guards and covers in their
functional places. Otherwise it may cause hazardous situations.
Illustration and specifications are not bonding all details. The items not specified in the
manual should be regarded as prohibited.
The designs are subject to modification without notice.
This instruction is an integral part of the machine and must accompany
the machine whenever it is resold or moved.
If you have any question, please contact with our company.

1.2 Who should use the instruction

The instruction is the necessary information for the personnel involved in using the
machine, whatever their duties:
The person involved in transporting and handling the machine.
The person involved in operating the machine.
The person involved in maintaining the machine.
The person involved in demounting the machine.

1.3 Intended use and limitation of use

Belt grinder is mainly used to conduct surface polishing and grinding of metal in factories,
so as to enhance the roughness and glossiness of spare parts surface. It enjoys high
efficiency and superior performance in grinding. It is an ideal substitute for polishing
machines.
This machine is only used for general metals grinding within the range of grinding capacity.
Metals with low ignition points such as aluminum, magnesium, etc., are prohibited to be
machined.
Warning:
The machine is not designed to be used in explosive environment.
3 / 16