Axminster AW200WSG Originele handleiding - Pagina 10
Blader online of download pdf Originele handleiding voor {categorie_naam} Axminster AW200WSG. Axminster AW200WSG 17 pagina's. Wide stone bench grinder
Pagina afdrukken
CHANGING THE GRINDING STONE
Step 5-6
Remove plate flange and carefully remove the stone.
Clean the interior stone guard, inspect the new stone for
cracks and damage to either the front face or the edges
before fitting. Carefully slide the stone on the shaft, replace
the plate flange, the nut and tighten against the rotation
of the stone. DO NOT OVERTIGHTEN.
Step 7
CONNECT THE GRINDER
TO THE MAINS SUPPLY.
Reconnect the grinder to the mains supply, give the grinder
a 'short burst' , by switching it on and off quickly. Check the
grinder is not subject to any undue vibration. If the grinder
does vibrate, switch off immediately and disconnect from
the mains supply. Remove the guard cover and check
stone and plate flange is fitted correctly. Check again, if
the grinder is still vibrating the stone/s may need dressing.
Dress the new stone lightly to ensure a 'good face' and
good concentricity.
10
Step 8-9-10