Axminster MD3220HD Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Axminster MD3220HD. Axminster MD3220HD 16 pagina's. 8" bench grinder

Setting up the Grinder...

A X M I N S T E R

W H I T E

Please read the section entitled Identification and Description of Parts, in order for

you to understand the terminology that we will use, so that you may better

understand the working and capability of your grinder. Keep this manual to hand for

reference for any other personnel that may be required to use the grinder.

Having assembled all the grinder attachments loosely, now the machine has to be set up

correctly and all the attachments securely fastened.

Place the grinder on a flat level surface.

Position the tool rests leaving a gap of approximately one and a half millimetres between

the grindstone and the rest, with the rest horizontal (preferably) tighten the star bolts

securely. (See fig 3)

Remember to adjust the tool rest as the grindstones wear down.

Adjust the spark guards until they are just clear of the grindstone; fasten the fixing bolts

securely. (See fig 4)

Remember to adjust the spark guards as the grindstones wear down.

Fig 3

Adjust the spark guards until they

are just clear of the grindstone

Position the eye shields on their pivot bolts, (if necessary, 'nip' the clamping bolt of the eye

shield clamp so that the eye shields remain in place).

If there is any tendency for the grinder to move, tip or tilt while it is being operated, it

should be bolted down; either to the bench or to a specific stand, or base board.

It is a good idea to dress new grindstones before use, to remove any possible irregularities,

and ensure the stones are running concentrically.

www.axminster.co.uk

Leave a gap of approximately

one and a half millimetres

between the grindstone

and the rest

Star bolt

Tool rest

Fig 4