Axminster Trade AT152OVS Originele handleiding - Pagina 8

Blader online of download pdf Originele handleiding voor {categorie_naam} Axminster Trade AT152OVS. Axminster Trade AT152OVS 16 pagina's. Oscillating sander

Pagina afdrukken

MOUNTING SPINDLE DRUM

1.
Disconnect the sander from the power source.
2. Select the proper diameter of spindle drum.
3. Clean the taper part of the spindle drum before mounting it into the spindle.
4. Use an open-end wrench to lock the spindle by holding its flat surface. At the same time, use
another open-end wrench to tighten the spindle drum.
5. Do not over tighten the spindle drum or it will be causing removable problem.
△
WARNING!
!
Disconnect the power source before removing the drum.
6