Axminster Trade 105782 Originele handleiding - Pagina 8
Blader online of download pdf Originele handleiding voor {categorie_naam} Axminster Trade 105782. Axminster Trade 105782 16 pagina's. Cyclone extractors
OPERATING AND ADJUSTMENTS
Switching ON/Off
ALWAYS TURN ON/OFF THE EXTRACTOR BY THE
NVR CONTROL SWITCH NOT THE MAINS SWITCH
This is to allow the shaker motor on the (AP357CEH)
to perform the self cleaning operation. If the cyclone
extractor is turned off at the mains switch, the shaker
motor will not cut in. If this is constantly repeated,
eventually the filter will become blocked, causing
reduced performance.
Manometer
The manometer is used to monitor the air flow in the
ducting system. When you first use your extractor it is
recommended you mark on 'manometer' the pressure
the extractor it running at, to do this follow the
instructions below.
Note: the reading can vary depending on the size of
the ducting system.
1. Connect your cyclone extractor to the ducting system.
2. Start up the extractor by pressing the 'green' button on
the NVR switch assembly and check the reading on the
manometer.
3. Using a marker or sticky label mark the reading on the
manometer, (see figure 01). This is to confirm that every
time you switch on you know what the read will be.
Figure 01
If you find the reading has increased there could be a
blockage in the ducting system or extractor unit, check
the following:
WARNING!! BEFORE CARRYING OUT ANY
MAINTENANCE DISCONNECT THE CYCLONE
EXTRACTOR FROM THE MAINS SUPPLY
• Check the rear filter for signs of build of sawdust and
clean with a vacuum cleaner
• Check the shaker motor is working properly
• Check the hoses for blockages
• Check the bin bag and empty if full
If the reading has decreased, check the following:
• Check the hoses are secure, 'NOT LOOSE' which will
lead to air leakages
• Check hoses for splits and cracks
• Check "Blastgates" that are not in use are shut
Extraction Accessories
For all of our accessories please see our catalogue and
website or contact us on:
Freephone: 03332 406 406
Replacement Waste Sacks
Code: 106369 Bin Sacks for AT154CEH & AP176CEH
Code: 106370 Bin Sacks for AT357CEH
Code: 106368 Filter Sacks for AT154CEH, AT176CEH, AT357CEH
8