ABB TZIDC-210 Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ABB TZIDC-210. ABB TZIDC-210 20 pagina's. Electro-pneumatic positioner for profibus pa with flameproof enclosure

Pagina afdrukken

Follow the procedure (steps 1 - 5) below to attach the positioner to a linear

actuator:

1. Mount the follower guide to the actuator

Fig. 5

Mounting follower guide to actuator

2. Assemble the lever (if not yet pre-assembled)

Fig. 6

Assembling the lever

42/18-81 EN

Electro-pneumatic positioner TZIDC-210

• Fasten the follower guide (1)

and the clamp plates (2) with

screws (4) and spring washers

(3) to the spindle of the actua-

tor; hand-tighten the screws.

• Slip the spring (2) onto the bolt

with the follower pin (1).

• Slip the plastic washer (3) onto

the bolt and compress the

spring with it.

• Insert the bolt with compressed

spring into the oblong hole in

the lever (4) and fasten it in the

desired position using the plain

washer (5) and nut (6) at the

lever; the scale on the lever

indicates the link point for the

stroke range.

• Slip the plain washer (8) onto

the screw (7), insert the screw

into the lever and counter with

the nut (9).