Alphasonik APP122 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alphasonik APP122. Alphasonik APP122 16 pagina's.

5. Input Sensitivity Adjustment

This control adjusts the amplifier's sensitivity to match the signal strength coming from the

source unit. Input sensitivity is variable from 200 Millivolts to 8 volts. Clockwise increases

sensitivity. Counterclockwise decreases sensitivity. THE KNOB IS NOT A VOLUME

CONTROL. A lower signal level will require increased sensitivity for full power. A higher sig-

nal will require decreased sensitivity.

6. Low Level Input RCA Jacks

These inputs are for signal cables from the source unit or other processor. Always use

high quality shielded RCA cables.

7. Low Level OUT RCA Jacks

The LINE OUT allows you to build multiple amplifier systems without having to use splitter

cords to distribute the signal. Now it is a simple matter of bridging one set of RCA cables

into the first amplifier, then using the line out RCA jacks as the feed to the next amplifier.

8. LED indicator (Status)

- PRT (Protection) : The amplifier protection circuitry will disable the amplifier if input

overload, short circuit, or extremely high temperature conditions are detected. When the

protection mode is in operation, the LED indicator on the side panel will be illuminated,

indicating the amplifier has gone into a self-preservation mode.

-PWR (Power) : This LED will illuminate when the amplifier is turned "ON". If it fails to il-

luminate, check the power connections to the amplifier and fuses.

Controls And Functions

MIN

MAX

INPUT

PRT

PWR

OUTPUT