Cinepro PowerLight 2400 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cinepro PowerLight 2400. Cinepro PowerLight 2400 5 pagina's. Ac power control center, advanced power conditioner, surge protector, system power sequencer
Pagina afdrukkenCINEPRO
PowerLight 2400
OVERVIEW
The Cinepro PowerLight 2400 is the most advanced power
conditioner, surge protector, and control center ever
developed. With advanced line conditioning, harmful noise
and interference from the AC line is eliminated. Active
electronic surge protection provides protection from harmful
lightning strikes and other power line disturbances.
Separate digital and video sockets are isolated from the rest of
the outlets, so that noise and hash originating in CD, DVD
players, and Satellite systems are prevented from reaching
other components via power cords.
Handy, LED illuminated slide-out lamp holders feature four
color - full range dimming and light angle adjustment.
Downward-directed light illuminates only the front panels of
the equipment below the PowerLight 2400 for non-invasive
equipment lighting during a music or video performance
LOCATION
The PowerLight 2400 should be placed directly above your
components in a rack. In this way the pull out light modules
will illuminate all components directly below and up to four
feet from the PowerLight 2400. The unit is designed to
supply power to most, if not all, of your audio-video system
components. As such, it should be located within convenient
reach of all component power cords. Heat is not a
consideration, so the unit can safely be placed in a closed
cabinet. Optional rack mount ears are available for
professional rack mounting of the component.
To connect the PowerLight 2400, plug the heavy duty three-
prong power cord directly into a properly grounded AC wall
outlet. A grounded outlet is important to preserve the surge
protection capabilities of the PowerLight 2400. If the front
panel Ground Fault indicator is not illuminated, there could be
a problem with the electrical ground coming out of the wall
socket. Have it checked by a qualified electrician
immediately.
The maximum continuous current of all connected
components is 20 amps (2400 watts AC). Peak currents of up
to 25 amps are allowed for a duration not exceeding 2
seconds.
SYSTEM POWER SWITCH
Touch the front panel switch for on or off function. The " AC
line" LED indicates the presence of voltage in the wall
socket.
FRONT PANEL VOLTAGE MONITOR
The PowerLight 2400 features a front panel display, reading
from 90 to 128 volts..
ACTIVE PROTECTION, AUTO RESTORE
A computer-controlled circuit continuously monitors
incoming AC voltage. It will flash the voltage display if the
incoming AC voltage approaches the high or low extremes of
90 or 134 volts. If the voltage goes below 90 or above 134
volts, the front panel " V olt Protect" indicator will illuminate,
and the PowerLight 2400 will instantly shut off all outlets to
.
protect your equipment. If it is desired that the system power
be re-applied automatically when the wall voltage is back in
proper range, either supply a 12V trigger voltage to the
sense input, or plug the sense AC cord into one of the un-
switched outlets on the rear of the PowerLight 1800 and
activate the sense switch on the rear panel. This, of course
will disable the front panel switch, and allow system power
whenever AC is present.
SYSTEM ILLUMINATION LAMPS
Two aluminum slide out lamp holders illuminate components
directly below the PowerLight 2400 for convenience. Using
Cool-Light LED' s, you may choose one of four colors (Red,
Green, Blue, White) for this effect. Lamps go out
automatically when retracted into the chassis. They are fully
dimmable, through a solid state dimmer that creates no
additional noise of its own. The lamps may be left on
continuously, if desired.