ARC AOS6SE1 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} ARC AOS6SE1. ARC AOS6SE1 15 pagina's. Multifunction oven 600mm fan-assisted oven stainless steel

Pagina afdrukken

button is pressed.

B. Set the time of ending (23 hours 59 minutes maximum):

Press the

button to set the time of ending;

The oven starts immediately,

process will shut automatically. Then

button is pressed.

When the related button is pressed, the set roast process will be displayed. Whenever the

and set backward the time to

the oven will revert to the manual operation process.

Timer

23 hours 59 minutes can be set as maximum.

To set the time, press the

the setting, the correct time (hour, minute) and the

pressed the time displaced will be seen. When the set time is reached,

again. To stop the alarm, press the

Note: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the set

process as well as the real time (hour, minute) will disappear. After the power is on again, three

shows on the screen, the oven will automatically reset.

3-keys timer procedure baking mode (only available on certain models)

Adjust the clock after switch on:

Once it connected with electrical power, the display will show "12:00" with the square symbol above "

Press the "+" or "-" button will increase or decrease the number until it reaches the right time; after 5 seconds it

will start automatically or you can press the function button to make it starts.

Automatic setting (set the time of full automatic starting and ending)

1. Press the function button repeatedly until the square symbol above the "

button to set the time frame baking for;

2. Press the function button repeatedly until the square symbol above the "

button to set the time to switch off;

3. Adjusting the constant temperature button and choosing button to set temperature and baking method.

After these setting, the symbols above the "

has been set.

For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.

Press the function button repeatedly until the square symbol above "

45 minutes;

Press the function button repeatedly until the square symbol above "

at 14:00.

After these setting, the proper clock (hour, minute) and the square symbol will show on the display, it indicates the

setting of baking procedure has been remembered automatically.

When the clock shows 13:15 (between 14 -15min), the oven will switch on automatically.

During the baking time frame, the square symbol will keep flashing.

When the clock shows 14:00, baking will switch off automatically. The alarm will ring, the square symbol will flash,

to stop the ringing press any button.

Semi-automatic setting (set the time of automatic starting and ending)

A. setting the time frame of baking (10 hours longest)

Press the function button repeatedly until the square symbol above "

Switch on the oven immediately, the square symbol above "

square symbol above "

B. setting the end time off baking (23hours and 59minutes longest)

Press the function button repeatedly until the square symbol above "

baking;

Switch on the oven immediately, the square symbol above "

baking procedure will switch off automatically. The square symbol above "

the alarm will ring, the square symbol will flash. To stop the ringing press any button.

The set baking procedure could be seen by pressing any function button repeatedly at anytime, only if the time

frame of baking is at "0" position. By adjusting the end time of baking to the current time, the set baking

procedure can be cancelled.

and

AUTO

flashes, the alarm rings. The ringing will stop after the

, the set roast process will be cancelled. When

button, and then + or - button, until the required time is shown on the screen. After

button.

" and "

" will flash, and alarm ring. To stop the ringing press any button.

will flash. When the set time of ending is reached, the roast

button will show on the screen. When the

" will flash, it indicates the baking procedure of oven

" begins to flash. When the baking is done the

" begins to flash. When it reaches the time set,

button is pressed again,

disappears and the alarm will ring

" flashes, and press "+" or "-"

" flashes, and set the time of baking to

" flashed, and set the end time of baking

", and set the time frame of baking;

" flashes, and set the end time of

" flashes,

button is pressed,

button is

and

AUTO