ABB ACS350 Series Installatie-instructies - Pagina 2

Blader online of download pdf Installatie-instructies voor {categorie_naam} ABB ACS350 Series. ABB ACS350 Series 2 pagina's. Nema 1 series enclosure kit for abb acs150; abb acs350
Ook voor ABB ACS350 Series: Gebruikershandleiding (14 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (4 pagina's)

Grounding

clamps

6. Install the clamp for the control cable, or if cables are run in

conduits, replace all clamps with suitable glands (not included).

Run cables through the clamps and tighten. Strip cable ends.

Fasten the grounding conductor (PE) of the input power cable

and the twisted shield of motor cable under the grounding

clamps. Connect the connectors to appropriate terminals. See

Electrical installation in the drive manual.

10. Fasten the hood to drive with two M3×12 screws.

11. Fasten the hood to wall with one M4 screw (not included).

ABB Oy AC Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: http://www.abb.com

Clamp

7. Install the gland box cover.

8. Fasten the cover with two M4×12 screws.

12. Drive with MUL1-R3 option installed.

9. Install the hood. First position the front edge carefully, then

press the hood downwards until it snaps on.