ARC Audio MOTO 600.4 Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARC Audio MOTO 600.4. ARC Audio MOTO 600.4 12 pagina's. 4 channel motocycle and off-road amplifier
Pagina afdrukken
AUTO SENSE
MOTO 600.4
The
uses a BTLD (Bridge Tied Load) Auto Detect
Turn-on circuit that offers a significant improvement in reliability
over previous designs. Instead of relaying on the music to supply
enough signal to turn the amplifier on. Robert Zeff's design detects
the IC (chip) used in the vast majority of stock head units and
amplifiers.
It is important to note the Auto Sense will not always work. Do to the
hundreds (or thousands) of different OEM system configurations, no
single solution can be 100% successful. If your system does not reliably
switch on and off, look for an alternative turn on source. It is possible to
spend many hours trouble shooting an Auto Sense problem. This is time
that could be spend enjoying your new audio system.
REMOTE
TURN ON
SPEARKER
LEVEL INPUT
+12V
INTERNALLY FUSED
30 AMP X 2
MOTO 600.4
AUTO DETECT
SPEAKER LEVEL INPUT
GND
MOTO
NOTE: The Remote Turn On wire is not used when
the AUTO SENSE feature is engaged. This lead
should be safely taped or capped so it does not
come in contact with any metal surfaces.
CH1
CH3
CH1
POWER
PROTECT
TURN ON
CH2
CH4
10
CH2
CH3
4Ω STEREO
2Ω STEREO
4Ω BRIDGED
CH 1-2
USE 2Ω ONLY
USE 2Ω
ONLY
LOAD
SELECT
LOAD SWITCH MUST BE SET TO 2Ω WHEN BRIDGED
CH4
4Ω STEREO
2Ω STEREO
4Ω BRIDGED
CH 3-4
LOAD
SELECT
REMOTE
TURN ON
PREAMP
LEVEL INPUT
TOP