Cino CN-F Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cino CN-F. Cino CN-F 8 pagina's. Commercial capsule coffee machine

Pagina afdrukken
Rotate the temperature scale clockwise
(The light is lit up individually); rotate the
temperature scale anti-clockwise (The light
is switched and lit up individually)
5. Restore of factory settings
Press the power button to enter the power saving mode and
then switch it on again (Or unplug it to cut the power and switch
on again) and the machine is restored to its factory settings.
6. Emptying system
In standby, press Key 1 and Key 2 simultaneously for 3
seconds. The buzzer "beeps" once. The machine is in the
emptying mode. The heating unit and the water pump start
working together till the water in the water tank is sucked out
completely. After the water pump is out of water, the water
pump stops working. The boiler keeps heating till the water
content in the boiler is completely evaporated. After emptying is
completed, the boiler and the water pump stop working. After
the buzzer makes a long "beep", press Key 3. The two lights
flashes and are lit up. All the cup volume lights flash at the
same time at 2 times per second, indicating emptying is
completed. Now only pressing the power button or unplugging
the power line can clear this state.

7. Cleaning and descaling.

In the standby mode, press Key 2 and Key 3 simultaneously for
3 seconds. The buzzer "beeps" once and then the product will
enter in descaling mode. The heating unit and the water pump
start working together till the water in the water tank is
extracted completely. After the buzzer makes a long "beep", the
process is over and the machine returns to standby mode. Now
only pressing the power button or unplugging the power line
can clear up this state.

8. Power off

In any state, pressing the power button for 3 seconds, the
machine enters its power-off state after a long "beep".
All the indicator lights are unlit (Including the power button
light).
4

9. Power saving

1.
After powered on, press Key 1 and Key 3 for 3 seconds.
The buzzer makes a long "beep" and the two indicator
lights of Key 3
machine has the power saving mode in this state.
Power
2.
In the standby mode, the machine enters the power
saving mode
saving mode if no operation occurs in a consecutive 10
seconds.
3.
In any state, press the power button. The coffee machine
enters the power saving mode after a "beep".
3.
After powered on, press Key 1 and Key 3 for 3 seconds.
The buzzer makes a long "beep" and the two indicator
lights of Key 3 flashes together 5 times at 3 times per
second. The machine has no power saving mode in this
state.
10. Warning
The capsule cup is not placed or is not placed at a
proper position. The machine shall automatically send
Capsule
a warning. All the temperature indicator lights keep
cup warning
flashing together (The flash frequency is 2 times per
second). Now it is only required to place the capsule
cup properly to clear the warning.
When the machine is lack of water in dispensing, the
machine sends out a warning automatically. The
warning method: All the cup volume indicator lights
Warning for
keep flashing (The flash frequency is 2 times per
lack of water
second). And the buzzer keeps "beeping" in the same
frequency as the indicator lights. Now it is required to
add water to the water tank and then press any key of
extraction to clear the warning.
When the machine cannot brew any beverage in
dispensing due to any expired capsule or bad capsule,
the machine sends out a warning automatically. The
warning method: All the cup volume indicator lights
Warning for
keep flashing (The flash frequency is 2 times per
being blocked
second). And the buzzer keeps "beeping" in the same
frequency as the indicator lights. Now it is required to
reset, take out the capsule cup, replace a new
beverage capsule and press any key of extraction to
clear the warning.
are lit up together for 3 seconds. The
5