Axor Citterio 27831 Series Installatie-instructies / garantie - Pagina 3
Blader online of download pdf Installatie-instructies / garantie voor {categorie_naam} Axor Citterio 27831 Series. Axor Citterio 27831 Series 12 pagina's. Wallbar set
Pagina afdrukken
Axor Citterio Wallbar Installation
Mark the positions for the screw holes (1). The center
of the top hole should be 36" from the center of the
bottom hole.
Drill the holes with a 6 mm bit suitable for the wall
surface (2).
Install the anchors. Seal the wall around the anchors
with waterproof sealant.
Install the mounting pieces with the screws and metal
washers.
Place the wallbar over the mounting pieces (1).
Tighten the set screws with a 3 mm Allen wrench (2).
3