Ciontek CS10 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ciontek CS10. Ciontek CS10 5 pagina's. Smart pos payment terminal
Pagina afdrukkenMagnetic card, IC card, SIM card, PSAM card, Micro SD card and contactless IC card
1. While swipe cards, swipe with constant speed, close to slot bottom, magnetic stripe should
face the screen as the silk‐screen directions, align at card slot, be sure magnetic cards is
intact and in good condition.
2. Follow the silk‐screen directions when insert IC cards, let the chip side upwards, insert
carefully till you feel card be clamped, do not pull out during reading process.
3. Take off battery before install SIM card, PSAM card and Micro card, install them to
corresponding slots.
4. Put card close to reading area while use contactless IC cards.
Instructions:
Stop the operation immediately if you notice below phenomenon:
1．Harsh noise while working.
2．Junk or water get into device accidentally.
3．Abnormal smell come out during work.
Stop immediately the operation and remove the battery, contact us or distributor at once.
Trouble Shooting and advised solution:
Fault phenomenon
No display on screen
Cannot read card
Read magnetic card data incorrectly
IC card data read incorrectly
NFC card data read incorrectly
Camera failure
Printer do not work
Communication failure
Elimination methods
1. check if battery installed right
2. check if battery is enough for work
1. check if card slot is clean
2. check if card has enough magnet info
1. swipe card with constant speed, close to slot bottom
2. magnetic stripe should face the screen, align at card
slot
3. try to swipe card in another direction
1. ensure the chip side is upward, card be inserted to
the top
2. ensure IC card chip is safe and sound
1. ensure card has NFC function
2. ensure read card in NFC area
3. ensure card/mobile be placed smoothly and steady
in NFC area
1. ensure camera not be covered
2. ensure if enough light for camera to work
1. ensure paper is sealed correctly
2. check if it has right size paper, and installed right
3. check If low battery
1. check if sim card inserted, if card contactor clean
2. ensure there is signal
3. try to re‐establish communication