CipherLab 8061 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CipherLab 8061. CipherLab 8061 12 pagina's. Portable terminals

Code 128

UPCE

UPCE with ADDON 2

UPCE with ADDON 5

EAN8

EAN8 with ADDON 2

EAN8 with ADDON 5

EAN13

EAN13 with ADDON 2

EAN13 with ADDON 5

Other barcodes must be enabled through programming.

2. Buzzer

To test the buzzer with different Frequency/Duration. Press ENTER key to start and then

press any key to stop the test.

3. LCD & LED

To test LCD display and LED indicator. Press ENTER key to start and then press any key

to stop the test.

4. Keyboard

To test the rubber keys. Press a key and the result will be shown on the LCD display. Note

that the FN key should be used in conjunction with numeral keys.

5. Memory

To test the data memory (SRAM). Note after the test, the contents of the memory space will

be wiped out.

4. Memory

Size Information

Information includes sizes of the base memory (SRAM), memory card (SRAM) and

program memory (FLASH) in the unit of kilobytes.

2. Initialize

To initialize the data memory (SRAM). Note the contents of the data space will be wiped

out after memory initialization.

5. Power

Show the voltages of the main battery and backup battery.

6. Load Program

To download the application program, BASIC run-time or font file. There are three interfaces

supported by the system, namely, the Direct-RS232, Cradle-IR and standard IrDA.

7. Bluetooth Menu (8061)

The Bluetooth menu includes the following items:

1. Information

2. IP Setting

3. BNEP Setting

4. Security