Accurate Technology ProScale 19 Beknopte installatiehandleiding - Pagina 7
Blader online of download pdf Beknopte installatiehandleiding voor {categorie_naam} Accurate Technology ProScale 19. Accurate Technology ProScale 19 8 pagina's.
Pagina afdrukken
Frequently Asked Questions
Can I mount the scale/encoder without the connector link or guide clip?
The connector link and guide clip provide an accurate and reliable
method of transferring the movement of the machine to the
electronics, while also absorbing any stresses due to slight
misalignments. If the guide clip or connector link are not used,
premature encoder or scale wear may occur and the warranty is
voided.
What does 'No Enc' mean?
If the encoder is off the scale, or the encoder cable is unplugged from
the readout, No Enc will appear on the readout. To clear:
1. Be sure the encoder is on the scale and properly oriented.
2. Unplug the encoder from the readout for five seconds.
3. Connect the encoder to the readout.
The readout does not change, or changes very little, as the scale or
encoder moves.
1. The readout is in the HOLD mode.
2. One of the scaling factors in the digital readout is set to a very
small value.
ProScale Model 19 Quick Installation
Page 7 of 8