CipherLab BT 1560 Hoe te beginnen

Blader online of download pdf Hoe te beginnen voor {categorie_naam} CipherLab BT 1560. CipherLab BT 1560 2 pagina's.

How to get started with your BT 1560 from Cypher Lab

Your Scanner comes with two parts (a scanner and a cradle) and two cables to

connect the cradle (a) to the computer and (b) to the power.

To connect the power to the cradle

1. Turn the cradle over and look in the bottom of the cradle

Plug the computer

cable in here

2. Now connect the computer cable to your computer and turn the cradle on.

3. Your computer should automatically recognise that this device is connected.

You should see a small message at the bottom of your screen saying "USB

Human Interface Device Installed"

4. When using your barcode for the first time, remember – it is waking up – hold

in the scanner trigger for 3 – 5 seconds until it beeps. Then wait for the

scanner indicator light to show a red bar of light

5. Now, turn over the base unit, there are two small barcodes on the bottom of

the unit

Here are the two barcodes you will

need to scan to activate your scanner.

Plug in the power

cable here