Arcam 290 Handboek - Pagina 3

Blader online of download pdf Handboek voor {categorie_naam} Arcam 290. Arcam 290 11 pagina's.

Pagina afdrukken

INTRODUCTION

This manual is in 4 parts:

This section has information relevant to

both the Delta 290 and Delta 290P. This

includes Warnings and Cautions on use

and details of how to bi-wire your

loudspeakers.

D290 integrated amplifier

operating

instructions.

D290P

power amplifier operating

instructions.

(The Xeta 290P power

amplifier has

different front panel

graphics but is functionally identical).

Using the D290&D290P together to bi¬

amp your loudspeakers.

N.B. Circled numbers eg © refer to items on

the diagrams inside the flap of the front

cover.

INSTALLATION

Check that your mains supply voltage

agrees with the voltage setting indicated

on the rear panel of the unit.

■

If your mains supply voltage is different,

consult your Arcam dealer.

MAINS SAFETY

■

This product is normally supplied with a

moulded mains plug already fitted to the

lead. If for any reason the plug needs to

be removed, it must be disposed of

immediately and securely, as it is a

potential shock hazard when inserted into

a mains socket.

■

If the plug is removed then the remaining

lead must be rewired as follows:

■

The blue wire must be connected to the

terminal which is coloured blue or

marked with the letter N.

■

The brown wire must be connected to

the terminal which is coloured brown or

marked with the letter L.

■

The green and yellow wire must be

connected to the terminal which is

coloured green and yellow, or marked

with the letter E or the safety earth

symbol.

■

When replacing the fuse in the supplied

moulded mains plug, the integral fuse

holder/cover must always be refitted.

■

Warning:

This apparatus must be

SAFETY STANDARD

■

This product has been designed to meet

the IEC 65 international electrical safety

standard.

MAINS SUPPLY CONNECTIONS

<2>

Insert the IEC line socket of the mains

lead fully into the power inlet on the rear

panel. Connect the other end to your

mains supply.

CAUTION: Your Delta 290 and D290P

generate heat when in use, particularly at higher

volumes. It is therefore most important never to

obstruct the ventilation slots on the top and

bottom of the unit as this will cause overheating.

If the temperature of the internal heatsinks rises

above a safe level, then a thermal cut out within

the amplifier will operate.

The POWER LED on the front panel will turn

amber and the output protection relays will

temporarily remove the feed to the loudspeakers.

The system will reset itself as the heatsinks cool

down.

Please note

that under certain

extreme

conditions it is possible for the Delta 290 or

D290P's thermal cut out to operate when

playing music at very high levels.