Arcam FMJ A28 - V1 Handboek - Pagina 6

Blader online of download pdf Handboek voor {categorie_naam} Arcam FMJ A28 - V1. Arcam FMJ A28 - V1 17 pagina's.

Pagina afdrukken

A28

connections

Power inlet

Connect the correct

mains cable here.

��

Voltage select

Ensure the voltage selected matches

your local power supply.

This output provides a 12V signal whenever

the unit is switched on (i.e., not 'off ' or in

'stand-by'). This signal can be used to switch

on power amplifiers (or other equipment)

connected to the A28.

noTe

Please read the 'Placing the unit' , 'Power' and

'Interconnect cables' sections on page 5 before

connecting up your A28 integrated amplifier!

Speaker terminals

The A28 is equipped with two

sets of speaker terminals.

See page 8 for information on

connecting loudspeakers.

��

Remote in

This allows remote-control signals to

be received by the A28 if the remote

sensor is covered (or otherwise not

'visible' to the remote-control).

See page 7 for more information.

Trig out

Pre-/power-amplifier connections

These sockets are only used if you are using the A28

as a pre-amp, for example, when using the A28 in

conjunction with a P38 in a bi-amplified system.

See page 9 for more information.

��

�

��

audio inputs

The labels below the inputs give suggested audio

inputs, although any suitable device may be

connected to the line-level inputs. (Note, however,

that the name of the input shown on the front-panel

display cannot be changed.)

DVD

The

see page 14 for the specification.

See page 7 for more information.

Recording loop

The A28 is equipped with

a recording loop for use

with recording devices (CD

recorders, cassette decks, etc.).

See pages 7 and 10 for more

information.

e-6

noTe

The

and

functions are only used

TRIG oUT

REMoTE IN

in multi-room systems. They are not required for

normal use.

Phono earth terminal

For connecting your

turntable earth lead (if

required). Note that this

��

terminal must not be used as

a safety earth.

and

are all line-level inputs.

SAT

TUNER

AUX

input has different characteristics –

phoNo (MM)