Arcam P49 Handboek & Instructies - Pagina 11
Blader online of download pdf Handboek & Instructies voor {categorie_naam} Arcam P49. Arcam P49 13 pagina's. Integrated amplifier/pre-amplifier/power amplifier
Pagina afdrukken
Continuous power output (20Hz—20kHz at 0.2% THD), per channel
Both channels, 8Ω, 20Hz—20kHz
Single channel, 4Ω, at 1kHz
A49
Harmonic distortion, 80% power, 8Ω at 1kHz
specifications
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz
Input impedance
Frequency response (ref. RIAA curve)
Signal/noise ratio (Awtd) 50W, ref. 5mV input
Overload margin, 5mV at 1kHz
Inputs:
Nominal sensitivity
Input impedance
Maximum input
Frequency response
Signal/noise ratio (Awtd) 50W, ref. 1V/2V input
Preamplifier output
Nominal output level
Output impedance
Headphones output
Maximum output level into 600Ω
Output impedance
Load range
Accessory power output
Two accessory power cables supplied, provides two
2.1mm DC connectors
General
Mains voltage
Power consumption (maximum)
Dimensions W x D x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
200W
400W
0.001%
5mV
47kΩ + 100pF
20Hz—20kHz ± 1dB
80dB
20dB
RCA type
XLR type
1V
2V
10kΩ
10kΩ
8V
15V
20Hz—20kHz ± 0.05dB
105dB
RCA type
XLR type
1.15V
2.3V
47Ω
200Ω
4Vrms
1Ω
16Ω—2kΩ
6V, 1A
12V, 1.5A
110–120V~ or 220–240V~
1kW
433 x 425 x 171mm
19.7kg
21.4kg
Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
E-20
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz
C49
Input impedance
Frequency response (ref. RIAA curve)
specifications
Signal/noise ratio (Awtd) 50W, ref. 5mV input
Overload margin, 5mV at 1kHz
Inputs:
Nominal sensitivity
Input impedance
Maximum input
Frequency response
Signal/noise ratio (Awtd) 50W, ref. 1V input
Preamplifier output
Nominal output level
Output impedance
Headphones output
Maximum output level into 600Ω
Output impedance
Load range
Accessory power output
Two accessory power cables supplied, provides two
2.1mm DC connectors
General
Mains voltage
Power consumption (maximum)
Dimensions W x D x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
5mV
47kΩ + 100pF
20Hz—20kHz ± 1dB
80dB
20dB
RCA type
XLR type
1V
2V
10kΩ
10kΩ
4.6V
8.2V
20Hz—20kHz ± 0.05dB
105dB
RCA type
XLR type
1.15V
2.3V
47Ω
200Ω
4Vrms
1Ω
16Ω—2kΩ
6V, 1A
12V, 1.5A
110–120V~ or 220–240V~
300W
433 x 410 x 171mm
8.7kg
10.4kg
Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
E-21