ABB ControlMaster CM50 Instructies
Blader online of download pdf Instructies voor {categorie_naam} ABB ControlMaster CM50. ABB ControlMaster CM50 4 pagina's.
Instruction IN/RandC/003–EN Rev.A
ControlMaster controllers and indicators
ConfigPilot
Creating, uploading and downloading configurations
Measurement made easy
1 Introduction
A configuration for a ControlMaster (both controller and
indicator) can be created, modified and backed up to a
PC using the ConfigPilot software program.
ConfigPilot is a utility used in conjunction with a USB
IrDA adaptor and can be downloaded from:
www.abb.com/recorders.
2 Items required
2.1 ConfigPilot kit
Description
USB IrDA adaptor
This publication
Table 2.1 ConfigPilot kit CM30/0715
Part no.
B12895
IN/RandC/003-EN
3 Firmware revision
The following instrument firmware revisions are compatible with
ConfigPilot:
Instrument
Firmware revision
CM15|P2|00|02|22
CM15
CM15|P2|01|02|22
CM10|P2|00|02|22
CM10
CM10|P2|01|02|22
CM30
CM30|P2|00|02|22
CM50
CM50|P2|00|02|22
CMF160
CMF160|P2|00|02|22
CMF310
CMF310|P2|00|02|22
Table 3.1 Instrument firmware revisions
IMPORTANT (NOTE) If using an earlier firmware
revision, contact your local ABB representative for more
information.
or later
or later
or later
or later
or later
or later