Arcam 8 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Arcam 8. Arcam 8 18 pagina's. Multi zone power amplifier
Ook voor Arcam 8: Handboek (8 pagina's)

Pagina afdrukken

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing

to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the

presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket

and insert the plug fully into the socket.

Many of these iteMs are coMMon sense precautions but, for your own safety and to ensure that you do not daMage the

unit, we recoMMend that you read theM.

Important safety instructions

This product is designed and manufactured to meet strict quality

and safety standards. However, you should be aware of the following

installation and operation precautions.

1. Take heed of warnings and instructions

You should read all the safety and operating instructions before operating

this equipment. Retain this handbook for future reference and adhere to

all warnings in the handbook or on the equipment.

2. Water and moisture

The presence of electricity near water can be dangerous. Do not use the

equipment near water – for example next to a bathtub, washbowl, kitchen

sink, in a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into the

enclosure through any openings. Liquid-filled objects such as vases

should not be placed on the equipment.

4. Lifting and placing the equipment

This amplifier weighs up to 27.5kg, so take extreme care when lifting or

moving this unit. We recommend that two people are available to lift this

unit.

Only use a rack or shelf that is stable and strong enough to support the

weight of this equipment.

5. Ventilation

Do not place the equipment on a bed, sofa, rug or similar soft surface, or

in an enclosed bookcase or cabinet, since ventilation may be impeded.

Keep a minimum of 5cm (2 inches) clear around the apparatus to allow

sufficient passage of air.

6. Heat

Locate the equipment away from naked flames or heat-producing

appliances such as radiators, stoves or other appliances that produce heat.

7. Climate

The equipment has been designed for use in moderate climates and in

domestic situations. Unplug this equipment during lightning storms to

prevent possible damage from a strike or mains surge.

8. Cleaning

Unplug the unit from the mains supply before cleaning. The case should

normally only require a wipe with a soft, lint-free cloth. Do not use

chemical solvents for cleaning. We do not advise the use of furniture

cleaning sprays or polishes as they can cause permanent white marks.

9. Power sources

Only connect the equipment to a power supply of the type described in

the operating instructions or as marked on the equipment. The primary

safety guidelines

CAUTION

ATTENTION

RISK OF ELECTRIC

RISQUE DE CHOC ELECTRIQUE

SHOCK DO NOT OPEN

NE PAS OUVRIR

method of isolating the equipment from the mains supply is to remove

the mains plug. The equipment must be installed in a manner that makes

disconnection possible.

10. Power-cord protection

Power supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them. Pay

particular attention to the point where they exit from the equipment.

11. Power lines

Locate any outdoor antenna/aerial away from power lines.

12. Speaker connections

Any speakers must be connected to the MZ8/MZ12 using class II wire

(i.e. no connection to Earth should be made). Failure to observe this

precaution may cause the unit to become damaged.

13. Non-use periods

If the equipment is not being used for an extended period, we

recommend that you unplug the power cord of the equipment from the

outlet, to save power.

14. Abnormal smell

If an abnormal smell or smoke is detected from the equipment, turn the

power off immediately and unplug the equipment from the wall outlet.

Contact your dealer and do not reconnect the equipment.

15. Servicing

You should not attempt to service the equipment. Contact your dealer to

arrange servicing.

16. Damage requiring service

The equipment should be serviced by qualified service personnel when:

A. the power-supply cord or the plug has been damaged, or

B. objects have fallen, or liquid has spilled into the equipment, or

C. the equipment has been exposed to rain, or

D. the equipment does not appear to operate normally or exhibits a

marked change in performance, or

E. the equipment has been dropped or the enclosure damaged.

Safety compliance

This equipment has been designed to meet the IEC/EN60065

international electrical safety standard.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Class II product

This equipment is a

Class II or double

insulated electrical

appliance. It has been designed

in such a way that it does not

require a safety connection to

electrical earth ('ground' in the

U.S.).