Arcam CD192 Handboek - Pagina 6

Blader online of download pdf Handboek voor {categorie_naam} Arcam CD192. Arcam CD192 9 pagina's. Arcam cd192 compact disc player

Pagina afdrukken

Using the CR-314 remote control

Ensure that CD mode is selected using the

toggle button. The 'CD' LED above the

button is lit briefly when CD mode is selected.

Turns the display on or off. Turning the display off

generally produces a slight improvement in sound

This button enables you to repeat any section of music

within a track. Whilst the disc is playing, press the

button at the start of the section you wish to repeat.

'REPEAT' is shown on the display and the letter 'A–'

flashes. Press the button a second time when you reach

the end of the section you wish to repeat. The 'A–B'

letters stop flashing and remain lit. This section will

repeat until you press

button (

) moves forward within the selected loop.

To repeat the entire CD or a pre-programmed selection

of tracks press

once: 'REPEAT' lights on the display.

RPT

To repeat a particular track, select that track and then

press

twice so that 'REPEAT 1' is shown on the

RPT

display. If you now select a different track, that track is

To cancel the repeat function press

Search backwards and forwards;

Skip track backwards and forwards (see page 5)

Pause, Play and Stop (see page 5)

Press once to shuffle play CD tracks (i.e. play them in

a random order). Press again to cancel shuffle play.

Press

once to display the remaining time of the

TITLE

currently playing track. Press again to display the time

remaining of the disc. Press a third time to turn the text

Press

again and the display reverts to its original

TITLE

setting, showing the time elapsed for the current track.

For CDs with text, pressing

loaded but not playing displays the artist's name.

Pressing

a second time displays the total number

TITLE

of tracks and the total playing time.

CD192

E-6

Downloaded From Disc-Player.com Arcam Manuals

CD/DVD

DISP (display)

quality.

A–B

. The forward search

RPT (repeat)

repeated instead.

a third time.

RPT

Search and Skip Track

OPEN

Opens and closes the CD tray

Playback control

P MODE

TITLE

display on.

once while the disc is

TITLE

0–9 keypad

This allows direct access to individual tracks on the disc.

To select a track, press the corresponding keypad button.

For tracks greater than 9, enter the digits in sequence.

For example, to play track 15, press and hold

number on the display moves to the left, then press

CLEAR

CD/DVD REMOTE

If you make a mistake whilst programming you can

DVD

delete the last entered track by pressing

To delete all the programmed tracks, press

repeatedly until '0' is displayed.

DVD

To exit the program facility, press

DISP

A-B

PROG (Program)

RPT

CLEAR

PROG

You can program a selection of up to 24 tracks from

a disc to play in any order. Select a track by using the

track into memory ('PROGRAM' appears on the display

to indicate that you have started programming a

sequence). Repeat these steps to program the remaining

tracks in your selection. Alternatively, press

and enter your track selection using the 0–9 keypad.

OPEN

The display shows the track numbers programmed,

the total length of the programmed sequence and the

number of tracks programmed (shown by a number

below the word 'STEP').

Each time you enter a track the number below 'STEP'

increments by one and flashes until you press

to confirm. If you fail to press

seconds the display stops flashing and you will have to

reselect the track.

MUTE

Press

entire sequence from the start. Press and hold

erase the programmed sequence. Press

exit the program facility.

MUTE

Stops sound to the speaker outputs of certain Arcam

amplifiers.

SUBT

TITLE

MODE

Volume +/–

ZOOM

AUDIO

MEM

RTN

Adjusts the volume on Arcam remote-controllable

amplifiers.

ANGLE

SETUP

STATUS

SRCH

Note that the volume (+/–) controls and

have no effect on the audio output level of the CD

players.

CR-314

PROG

and

buttons, then press

PROG

to play the program. Press

NOTE: Remember to install the two AAA batteries

supplied before trying to use your remote control.

Do not place anything in front of the display area

on the CD player (where the IR receiver is located),

or the remote control may not work.

Note that greyed-out buttons on the remote control

are DVD-specific and are not used with the CD

player.

until the

CLEAR

to program the

once

PROG

within about five

again to replay the

CLEAR

again to

PROG

button

MUTE