Arcam DV88 Handboek - Pagina 9

Blader online of download pdf Handboek voor {categorie_naam} Arcam DV88. Arcam DV88 18 pagina's. Progressive scan output
Ook voor Arcam DV88: Handboek (20 pagina's), Handmatig (1 pagina's)

Arcam DV88 Handboek

Using the DV88: basic operation

Introduction

'Basic operation' explains how to play a DVD, CD or other type of
disc, including the use of the CR-314 remote control.
More sophisticated features – such as special playback modes
and using Bookmarks – are described later, in 'Advanced
operation'.

Front panel controls

Switching on

Switch the unit on by pressing the
LED glows green when the unit is powered up and red when in
standby mode (standby is operated from the remote control).
Note that the remote control sensor is located on the right hand
side of the display window. Do not obstruct this or the remote
will not work.
HDCD indicator
This LED is located on the left of the display and lights green to
indicate when HDCD (High Defi nition Compatible Digital) material
is playing from suitably recorded audio CDs.

Playing a disc

Loading a disc
Press
place the disc on the tray, with the playback side facing down.
Some discs are double sided, in which case the side labelled
'side A' should face up, to access side A.
Press
after a pause of a few seconds.
Playing a disc
Most DVDs begin playing automatically, but some titles begin by
displaying a menu. Select the menu item 'Play movie' (or similar)
using the cursor pad, then press
For CDs and VCDs (and DVDs that do not play automatically),
press
Note that when playing DVDs, the drive mechanism operates at
much higher speeds compared to CDs and may produce more
noise when loading and playing initial chapters.
POWER
on the front panel (or
LOAD
OPEN
on the front panel to close the tray. The disc loads
LOAD
to start playback.
OK
.
PLAY
LOAD
PLAY
STOP
Fast play
Press
button. The status
forward or backwards. There are four speeds for fast playback:
x2, x4, x8 and (except for audio CDs) x20. Press the button
repeatedly to cycle through the different speeds. To resume
normal playback speed, press
Skipping chapters/tracks
To skip chapters (or tracks on a CD), press
When skipping back, the fi rst button press takes you to the
beginning of the current chapter. Pressing the button again
takes you to the start of the previous chapter.
Note that it is common for Video CDs to have only one track.
Pausing playback
Press
pause playback. To resume playback, press
on the handset) and
panel or
Stopping playback
Press the
control to stop playback.
When playing a DVD, pressing
stop'. If you now press
it was stopped.
If you press
resumes from the beginning of the disc.
TRACK
PAUSE
or
on the front panel or remote control to play fast
.
PLAY
on the front panel or
on the remote control to
PAUSE
on the handset.
button on the front panel or
STOP
once performs a 'resume
STOP
, playback resumes from the point
PLAY
twice, this is a 'complete stop', and playback
STOP
DV88 DVD PLAYER
POWER
or
.
on the front
PLAY
on the remote
DV88
9