Arcan Blackline XL2TB Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Arcan Blackline XL2TB. Arcan Blackline XL2TB 6 pagina's. Extra long and low clearance service jack

Pagina afdrukken

INSPECTION

Visual inspection should be made before each use of the jack, checking for leaking hydraulic fluid and damaged, loose or missing parts. Any

jack which appears to be damaged in any way, is found to be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE

until necessary repairs are made.

Handle

Socket

Saddle

Front

Wheels

SETUP

Depress the upper handle lock in the upper handle while simultaneously inserting the end of the upper handle in the lower handle.

Rotate the upper handle back and forth until the handle lock seats in the hole in the lower handle lock hole.

Unscrew the handle bolt so that it will not interfere with the insertion of the handle in the handle socket. Insert the handle in the handle

socket and rotate the handle assembly back and forth until the release valve fits in the receiver in the bottom of the handle. Secure the

handle in the handle socket by tightening the handle bolt.

Sometime air gets trapped in the hydraulic system during shipping and handling. If the pump feels spongy, or there is not a full

incremental pump stroke, or the jack will not raise to maximum height, follow these instructions in order to purge air from the system:

With the lift arm in its completely retracted position and the pump handle rotated all the way in a clockwise direction until it stops,

rotate the pump handle in a counterclockwise direction two full revolutions.

Proceed to pump the jack 15 full incremental pump strokes.

Rotate the pump handle clockwise until it stops and proceed to pump the handle until the lift arm reaches maximum height.

Repeat steps "A" through "C" until all air is purged from the system.

XL2TB User Manual

Handle Socket

Bolt

Lift

Arm

Upper

Handle

Lower

Handle

Socket

Rear

Casters

Upper

Handle

Lock

Lower

Handle

Bumper

REV: 11/27/19