Digicel WiMAX Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digicel WiMAX. Digicel WiMAX 2 pagina's. Broadband modem for wireless internet access

Pagina afdrukken

Quick Start

GUIDE

Broadband Modem for

wireless internet access

What's in the Box?

• broadband modem

• Power adapter

• Ethernet cable

• Quick Start Guide

• complete user manual cd

The first step to setting up your broadband modem is getting to know

what the icons mean.

The following figure shows the icons on your Digicel 4G Broadband modem:

Power

WiMAX Connection

Signal Strength Indicators

Voice Lines 1&2

Wireless Network

Option 2 - Connecting the broadband modem to a computer wirelessly

Please note that your broadband modem does not send out a WiFi signal when

you first turn it on.

To turn on the WiFi signal, follow these simple steps:

• Connect your computer to the Ethernet port of the broadband modem with

an Ethernet cable (See Figure 5)

• Launch your web browser

• Enter the URL "192.168.1.1" in the address field

• Log into the Web Self Care Portal by entering "user" in the user name field

and "user" in the password field then click "Log in"

Please see Figure 1 for an example of the login screen.

Option 1- How to connect your broadband modem to your computer with

an Ethernet cable

1. Connect your computer to the Ethernet port of the broadband modem with

an Ethernet cable (See Figure 5).

2. Power on your computer.

3. Connect the power adapter to the broadband modem and the other end to the

wall outlet. (See Figure 5).

4. Wait a few minutes for the broadband modem to be initialised.

5. When the WiMAX connection and the signal strength icons are both lit, the

broadband modem is now operational.

Note: You can connect four computers simultaneously using Ethernet cables.

(WiFi)

The Figure 2 screen will display if you have not yet changed your password.

We recommend that you change the default password. To change the

password, enter a new password, retype it to confirm and click "Apply".

Alternatively click "Ignore" to go straight to the main menu if you do not

want to change the password now.

After you have clicked on "Ignore" or entered a new password, follow the steps

below to enable WiFi:

• Click on "Advanced" (See Figure 3).

• Click on "WiFi Configuration".

• Click on "General".

• To enable the WiFi Signal, check the "Active Wireless LAN" box (See Figure 4).

• To change the name of the WiFi signal, enter a new name in the "Network

Name (SSID)" box (See Figure 4).

• To change the Security Mode, select the first or second option in the drop

down menu (See Figure 4). Once you have selected a security mode type in

a password in the space below. Remember this password as you will need to

enter it in any device that you want to be connected wirelessly to the modem.

• Click '"Apply" to save all settings (See Figure 4).

After you have applied the settings, the WiFi signal on your modem will be

enabled. To connect using this new WiFi signal, search and select your newly

enabled connection.

Note: You can connect four computers simultaneously using WiFi. Digcel 4G Broadband

recommends that you secure your WiFi signal so that unauthorised persons do not connect to it.

Unauthorised connections may result in slower connection speeds for authorised persons. Please

consult the broadband modem manual on how to choose your wireless security mode.