digico SD7 Technische opmerkingen
Blader online of download pdf Technische opmerkingen voor {categorie_naam} digico SD7. digico SD7 11 pagina's. Replacing and cleaning faders
Ook voor digico SD7: Handmatig (9 pagina's)
Pagina afdrukken
TN198 Page 1 of 11
TECHNICAL NOTE
th
th
Date 14
Nov 08 (rev 6
Feb 09)
ref 198
Raised by: RA/DP
Distributed to: as required
Soundtracs - Digico(UK) Ltd. unit 10 Silverglade Business Park Chessington Surrey KT9 2QL England
Tel: +44 1372 845600 Fax: +44 1372 845656 email: [email protected]
SD7 Mixer
Installing Optocore® Hardware and Software
These instructions will guide you through fitting the Optocore option to SD7 Engines.
The Standard SD7 Optocore upgrade kit (per Engine) consists of :
1 x Optocore PCB
2 x HMA to LC Duplex Fibre Cables
1 x Grey 10 Way Serial Cable
1 x RJ45 Loom : RJ45 Socket to RJ45 Plug
4 x M2.5x6mm Screws
4 x Shakeproof Washers
1 x Screwlock Assembly
1 x Length of spiral cable wrap
nd
If you have paid extra for the Optional 2
Optical Loop Option, in addition to the kit contents above,
you will receive 2 Additional HMA to LC Duplex Fibre Cables.
Tools required :
2mm Hex driver
Medium Flat blade screwdriver
Medium (1pt) Pozidrive screwdriver
34mm spanner to suit HMA optical connectors (see text)
Leave yourself plenty of time to perform this upgrade.
Read all the instructions before proceeding.
TN198.doc\