Axxera AXS609 Installatie- en gebruikershandleiding - Pagina 2

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Axxera AXS609. Axxera AXS609 9 pagina's. Axs series

Thank you for purchasing the AXS Series car speakers. Although Axxera has attempted to

make sure all of the information contained within this manual is accurate, please be aware

that any part of it is subject to change without notice.

Before installation, please follow these guidelines:

1. Be sure to carefully read and understand the instructions before attempting to install

this product.

2. For safety, disconnect the negative terminal from the battery prior to beginning the

installation.

3. Use the highest quality connectors for a reliable installation and to minimize signal or

power loss.

4. Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines,

brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

5. Never run speaker wires underneath your vehicle. Running speaker wires inside the

vehicle provides the best protection from exhaust heat and environmental elements.

6. Avoid running wires over, near, or through sharp edged surfaces. Use rubber grommets

to protect any wires routed through metal.

7. When running the speaker cable from the amplifier, avoid running it near sources of

high current (i.e. wiring harnesses, battery cables).

PREPARATION

Safety Guidelines

The following instructions should be used as a general guideline only.

If you are unsure about performing any of the procedures listed

below, please consult a professional car audio installation center.