Digicode DGA Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digicode DGA. Digicode DGA 20 pagina's. Surface-mount keypad - cast aluminium

Pagina afdrukken

INSTALLATION MANUAL

DGA

Cast aluminium Digicode

2] Press A7 to program a sub master code for the user individual Pin code modification of Group 1:

- the green LED lights on during 1 second,

- enter the new 2-digit sub master code,

- the green LED lights on during 1 second to confirm programming of the sub master.

3] Press A8 to program a sub master code for the user individual Pin code modification of Group 2:

- the green LED lights on during 1 second,

- enter the new 2-digit sub master code,

- the green LED lights on during 1 second to confirm programming of the sub master.

4] Press B to exit from programming:

- the red LED lights off to confirm exit from programming.

AUDIBLE SIGNAL

The audible signal is enabled in programming mode and when the relay is energised after a valid code.

To enable the audible feedback on a key press:

1] Enter the master code twice (12345 default value master code):

- 2 beeps are emitted to confirm entry in programming mode.

2] Press A twice:

- One beep is emitted,

- Press 0 to disable the audible signal during a keypress,

- Press 1 to enable the audible signal during a keypress,

- One beep confirms the modification.

3] Press B to exit from programming:

- 2 beeps are emitted to confirm exit from programming mode.

Self Contained

cdvi.se

cdvigroup.com