Epson 11880 - Stylus Pro Color Inkjet Printer Uitpakken en installatiehandleiding - Pagina 9

Blader online of download pdf Uitpakken en installatiehandleiding voor {categorie_naam} Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 pagina's. Stylus pro11880
Ook voor Epson 11880 - Stylus Pro Color Inkjet Printer: Snelle referentiehandleiding (14 pagina's), Brochure (1 pagina's), Brochure & specificaties (8 pagina's), Netwerkhandleiding (46 pagina's), Handleiding productinformatie (10 pagina's), Beperkte garantie (12 pagina's), Brochure & specificaties (7 pagina's), Brochure & specificaties (8 pagina's)

4. Plug the cable connector into the connector on

the back of the printer as shown below, then

tighten the screws on both sides of the

connector.

5. Turn the lock lever to the left to release it.

6. While holding the movable unit, attach the

movable unit stopper on the bottom of the

movable unit. Snap the two protrusions of the

stopper into the movable unit, so the stopper

does not fall off. Tighten the two screws to

attach the movable unit to the horizontal strut.

7. Attach the flange (marked with L) on the

movable unit by pinching the knob.

The flange is reversible. One side is for the

3-inch core, and the other side is for the 2-inch

core. Set the appropriate side for the core.

8. Attach the reflector on the back of the left base

unit, and then tighten the two screws.