Epson 11880 - Stylus Pro Color Inkjet Printer Handleiding productinformatie - Pagina 5

Blader online of download pdf Handleiding productinformatie voor {categorie_naam} Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 10 pagina's. Stylus pro11880
Ook voor Epson 11880 - Stylus Pro Color Inkjet Printer: Snelle referentiehandleiding (14 pagina's), Brochure (1 pagina's), Brochure & specificaties (8 pagina's), Uitpakken en installatiehandleiding (28 pagina's), Netwerkhandleiding (46 pagina's), Beperkte garantie (12 pagina's), Brochure & specificaties (7 pagina's), Brochure & specificaties (8 pagina's)

Epson 11880 - Stylus Pro Color Inkjet Printer Handleiding productinformatie
Menu
Item
HEAD
PAPER THICKNESS
ALIGNMENT
SELECT PAPER TYPE
SELECT THICKNESS
ALIGNMENT
AUTO
MANUAL
NETWORK
NETWORK SETUP
SETUP
IP ADDRESS SETTING
IP, SM, DG SETTING
BONJOUR
INIT NETWORK
SETTING

Replacing Ink Cartridges

The easiest way of checking ink levels is from the control
panel LCD display. The numbers below the ink icons on the
LCD display correspond to the 9 ink cartridge slots on the
printer (as listed on page 2). The icons show the approximate
amount of ink remaining as follows
Full
Ink low (flashing) Letters indicate
ink color
Half full
Ink expended
20% or less
Cartridge error or no cartridge
When the red
B
ink check light (and the ink bay light) is
flashing (and
appears on the LCD display), the
INK LOW
indicated cartridge is almost expended. Make sure you have a
replacement cartridge. When the lights stay on and
is displayed, the cartridge is expended. You
ENOUGH INK
must replace the cartridge before you can continue printing.
Caution:
Leave the low or expended cartridge in the printer until you are
ready to replace it.
To prevent ink reporting errors, never replace the ink cartridges
with the printer turned off.
Settings/Explanation
8 mil (0.2 mm), 4 to 60
mil (0.1 to 1.5 mm)
UNI-D, BI-D 2-COLOR,
BI-D ALL, BI-D #1,
BI-D #2, BI-D #3
UNI-D, BI-D 2-COLOR,
BI-D ALL
DISABLE, ENABLE
AUTO, PANEL
IP address, subnet
mask, default gateway
ON, OFF
Resets all network
settings
:
NOT
See page 3 for information on selecting the correct
replacement cartridges. Before you start, make sure the printer
is powered on. Then follow these steps to replace an ink
cartridge:
1. Note the color of the cartridge whose icon and abbreviation
is on or flashing. This is the cartridge you need to replace.
2. Press the ink cover button to unlock the ink bay, then open
the cover.
Note:
If the ink compartment doesn't open when you press the button,
insert the end of a paper clip in the small hole on the upper left
corner.
3. Push in the expended cartridge to release it.
4. Remove the expended ink cartridge from the printer. It's a
good idea to save a set of expended cartridges so you can use
them for transporting the printer, if necessary.
Warning:
Do not shake the expended cartridge, or ink may leak out. If ink
gets on your hands, wash them thoroughly with soap and water.
If ink gets in your eyes, flush them immediately with water.
10/07
Epson Stylus Pro 11880
Epson Stylus Pro 11880 - 5