Epson 1280 - Stylus Photo Color Inkjet Printer Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson 1280 - Stylus Photo Color Inkjet Printer. Epson 1280 - Stylus Photo Color Inkjet Printer 27 pagina's. Product support bulletin(s)
Ook voor Epson 1280 - Stylus Photo Color Inkjet Printer: Cartridges vervangen (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Aanvullende handleiding (1 pagina's), Compatibiliteitshandleiding (1 pagina's), Aanvullende handleiding (2 pagina's), Start Here (2 pagina's), Brochure & specificaties (2 pagina's), Productinformatie (13 pagina's), Start hier Handleiding (6 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (12 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Aan de slag handleiding (32 pagina's), Handleiding voor installatie-instructies (8 pagina's)

If your Bluetooth-enabled laptop computer supports the Bluetooth Serial Port

Profile, you can use it to print to the following printers: EPSON Stylus C60,

EPSON Stylus C80, EPSON Stylus Photo 820, EPSON Stylus Photo 890, and

EPSON Stylus Photo 1280. Your laptop may either have built-in Bluetooth

capabilities, or a Troy WindPort PCMCIA card.

Although other Bluetooth PCMCIA cards may work with the

print adapter, EPSON recommends that you use the WindPort

card to ensure that the print adapter works correctly.

This chapter explains how to create a virtual COM port, configure the printer

driver to use the virtual port, and print. For complete configuration information,

see your Windows documentation.

Most Bluetooth devices that support the Bluetooth Serial Port profile allow you to

create a virtual COM port. A COM port (for example, COM1) is normally used

with an RS-232 connection or a modem. A virtual COM port emulates a COM

port, but works over the Bluetooth wireless link.

To add a virtual COM port, follow the instructions that came with your laptop,

Bluetooth PCMCIA card, or USB dongle. The name of the virtual port should

start with COM and end with a number (for example, COM4). Make sure that

you don't use the name of an existing COM port (generally, you can't use COM1

or COM2). In some cases, you need to restart your laptop to enable the port.

Before you begin, follow your printer documentation to install the printer driver

and set up your printer. Then follow these steps to configure the printer driver to

use the virtual COM port.

Windows XP: Click Start > Control Panel > Printers and Other

Hardware > View installed printers or fax printers.

Other Windows systems: Click Start, point to Settings, and then

select Printers.

Using a Laptop