Digicom Archimede SMS Operationeel handboek - Pagina 13
Blader online of download pdf Operationeel handboek voor {categorie_naam} Digicom Archimede SMS. Digicom Archimede SMS 18 pagina's. Remote alarm system
Pagina afdrukken
Example of a configuration message is as follows :
#10#Airconditioner#+4467895657488#+4473263748596#+445476576879888#
Note as with all commands the Archimede will only accept and act on messages
originating from predesignated telephones with Caller Identify enabled.
3.1.5 Conguration in Standby Mode
As previously stated the Archimede SMs must be powered in order to operate. However
there are instances where it is necessary to inhibit sending of SMS messages
automatically (for instance where the unit is used in an intrusion alarm system and the unit
must be activated/deactivated via a hidden switch or a timer).
Contacts 3 & 4 can be configured to toggle the unit into active or standby mode on any
transition across these inputs. In this case the number of alarm inputs managed is reduced
to 7.
When brought into active mode the Archimede executes a reset of all of the inputs states.
The Archimede can also be placed into STANDBY mode remotely by sending the following
message.
# 1 # STANDBY # Tel 1
In the Standby mode the unit can be interrogated from a remote cellular phone using the
#TEST# message.
#TEST#
Field
#
1
#
STANDBY
#
No Tel 1
#
No Tel 2
#
No Tel 3
#
No Tel 4
# Tel 2 # Tel 3 # Tel 4 # Tel 5 # Tel 6 #
Quantiy Characters
1
1
1
7
1
20 Max
1
20 Max
1
20 Max
1
20 Max
Description
Delimit Character
Contact 1 is used for Standby Function
Delimit Character
Enables Standby function
Delimit Character
First Tel Number allowed to send control
message
Delimit Character
First Tel Number allowed to send control
message
Delimit Character
First Tel Number allowed to send control
message
Delimit Character
First Tel Number allowed to send control
13