Epson 2000P - Stylus Photo Color Inkjet Printer Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 pagina's. Product support bulletin(s)
Ook voor Epson 2000P - Stylus Photo Color Inkjet Printer: Cartridges vervangen (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Specificaties (1 pagina's), Productinformatie (13 pagina's), Gebruikershandleiding (12 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Snelstarthandleiding (2 pagina's), Handleiding voor installatie-instructies (8 pagina's)

Caution:

Make sure the ink cartridge tabs are not under the tabs protruding

from the base of the opened ink cartridge clamps, as this could

damage the clamps.

Note:

Install both ink cartridges. If either of the cartridges is not installed, the

printer will not work.

6. Press the ink cartridge clamps down until they lock in place.

7. Press the orange ink cartridge replacement button. The print head

moves and the printer begins charging the ink delivery system. This

process takes about two and a half minutes.

Caution:

Always press the orange ink cartridge replacement button to move

the print head. Do not move it by hand. Doing so may damage the

printer.

While the ink is charging, the P power light flashes and the printer

produces a variety of mechanical sounds. These sounds are normal.

When the ink delivery system has been charged, the print head

returns to the home (far right) position and the P power light comes

on.

Caution:

Never turn off the printer while the P power light is flashing.

8. Close the printer cover.