Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO. Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO 2 pagina's. 24-pin dot matrix printer
Ook voor Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO: Gebruikershandleiding (22 pagina's), Snelle referentie (12 pagina's), Gebruikershandleiding (17 pagina's), Specificaties (2 pagina's), Specificaties (3 pagina's), Referentiehandleiding (34 pagina's)

Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO Installatiehandleiding
Installing the Printer Software
Installing the Printer Software
Installing the Printer Software
Installing the Printer Software
For Windows XP users
Use the printer driver included with Windows XP.
To install the printer driver included in Windows XP, follow the steps below.
How to install the printer driver
1. Turn the printer off, then connect the printer to your computer.
2. Turn the printer on.
3. Turn your computer on and run Windows XP.
4. The printer is detected by your computer which then automatically begins installing
the printer driver included with Windows XP.
If you have upgraded your computer from a previous version of Windows to
Windows XP, uninstall the existing printer driver before installing the new one.
If you cannot install the printer driver according to the steps shown above, contact
customer support services.
EPSON customer support list
Country
URL
UK & Republic of Ireland
www.epson.co.uk/support/download
Denmark
www.epson.dk/technical/download
Finland
www.epson.fi/technical/download
Israel
www.epson.com
Middle East
www.epson.com
Norway
www.epson.no/technical/download
South Africa
www.epson.co.uk/support/download
Sweden
www.epson.se/technical/download
India
www.epson.co.in
Indonesia
www.epson-indonesia.com
Malaysia
www.epson.com.my
Philippines
www.epson.com.ph
Singapore
www.epson.com.sg
Thailand
www.epson.com.th
Australia
www.epson.com.au
Hong Kong
www2.epson.com.hk/ehkes/jsp/English/index_e.jsp
Note:
Using the printer driver included with Windows XP, the EPSON Status Monitor 3 for
Windows XP from EPSON customer support will not install properly.
To install the printer driver, follow the steps below.
About EPSON Status Monitor 3
You cannot use the EPSON Status Monitor 3 (included in the printer software CD-ROM
that comes with the printer) with the printer driver included with Windows XP.
If you are using EPSON Status Monitor 3 with Windows XP, you need to get both the
printer driver and EPSON Status Monitor 3 for Windows XP from EPSON customer
support.
To use the EPSON Status Monitor 3, install both the printer driver and EPSON Status
Monitor 3 for Windows XP from EPSON customer support.
To get printer driver and EPSON Status Monitor 3 for Windows XP, access one of the
following web sites and download both the latest printer driver and EPSON Status
Monitor 3.
How to install the printer driver
1. Click Setup.exe in the printer driver downloaded from EPSON customer support,
and install the printer driver.
(When a warning screen appears, click the Continue button to proceed with the
printer driver installation.)
2. Click Stmsetup.exe in the EPSON Status Monitor 3 downloaded from EPSON
customer support, and install the EPSON Status Monitor 3.
Note:
❏ After the install, [EPSON LQ-680 ESC/P2]and [EPSON LQ-680 ESC/P 2] icons appear
in the [Printers and Faxes] folder.
❏ Select [EPSON LQ-680 ESC/P2] when you open the printer properties or select the
printer driver, because these are original EPSON products driver.
❏ Do not delete [EPSON LQ-680 ESC/P 2], which are the standard OS drivers, but leave
as it is for Windows XP specification.

Getting More Information

Using the Reference Guide
The Reference Guide provides detailed information on the Printer's functions, optional
products, Printer software, troubleshooting, and technical specifications.
Follow these steps to access the Reference Guide from the CD-ROM:
1. Insert the printer software CD-ROM in the CD-ROM drive.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON
printer. EPSON is not responsible for any use of this information as applied to other printers.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)
failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark and EPSON ESC/P2 is a trademark of SEIKO EPSON CORPORATION.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
For Windows Me or 2000 users
Note:
Installing the printer software for Windows 2000 may require administrator privileges. If
you have problems, ask your administrator for more information.
1. Make sure that the printer is turned off.
2. Insert the printer software CD-ROM into the CD-ROM drive. The Install dialog box
appears.
Note:
If the Installer dialog box does not appear, double-click Setup.exe in the CD-ROM.
3. Select Install Software, and click
4. Follow the instructions on the screen.
For Windows 98, 95, 3.1, NT 4.0, or NT 3.5x users
Note:
❏ Installing the printer software for Windows NT may require administrator privileges.
If you have problems, ask your administrator for more information.
❏ The examples in the following section are from the Windows 98 operating system.
They may vary in appearance from what actually appears on your screen;
however, the instructions are the same.
1. Make sure that the printer is turned off, then insert the printer software CD-ROM into
the CD-ROM drive. The install dialog box appears.
Note:
If the Installer dialog box does not appear, double-click Setup.exe in the CD-ROM.
2. Select Install Software, and click
3. Select your printer, then click OK and follow the instructions on the screen.
4. When prompted, insert your Windows CD-ROM, and click OK.
Note:
❏ If your PC shipped with Windows pre-installed, setup may complete without
requiring the Windows CD-ROM, and your printer is ready to use.
❏ If you receive a message saying the drive is not accessible, click Cancel and try
again.
❏ If you are using Windows NT, go to step 5.
5. Click Browse to select appropriate path for the printer driver, then click OK and
follow the instructions on the screen.
Note:
If you are using Windows NT, insert your Windows CD-ROM when prompted on the
screen.
6. Select the appropriate file in the folder, then click OK.
7. When prompted, insert the Printer Driver Software CD-ROM, then click Browse to
select appropriate path.
Note:
❏ If you receive a message saying the drive is not accessible, click Cancel and try
again.
❏ If a "System Error" message appears, click Cancel. The exact message differs
depending on your version of Windows.
❏ If you are using Windows NT, you do not need to specify a path.
❏ If you are using Windows 98, Printer Utility Setup may start. If it does, follow the
instructions on the screen.
8. Setup is complete. You are ready to use.
For DOS programs
To control the printer from DOS application programs, you need to select the printer
you are using or another available printer from the printer list of your application.
Choose the EPSON LQ-680/LQ-680Pro printer at the appropriate step in the setup or
installation procedure of your DOS application program. If the list in your application
does not include the LQ-680/LQ-680Pro printer, choose the first available printer from
this list.
LQ-670
LQ-870/LQ-1170
LQ-580/LQ-570e
LQ-570/1070/570+/1070+
LQ-2070/LQ-2080
DLQ-3000/DLQ-3000+
LQ-2170/LQ-2180
DLQ-2000
Note:
If your application does not list a suitable alternative, contact the software
manufacturer to see if an update is available.
Once the printer software has been successfully installed onto your computer,
your printer is ready to use.
2. Double-click User Guides from the screen. The online guide dialog box appears.
.
.
LQ-1060
LQ-1050
LQ-2550
LQ-2500
Copyright© 2002 by SEIKO EPSON CORPORATION, Nagano, Japan.
Printed in XXXX