DigiDesign FWx FireWire Record/Playback Option Card Handmatig - Pagina 8
Blader online of download pdf Handmatig voor {categorie_naam} DigiDesign FWx FireWire Record/Playback Option Card. DigiDesign FWx FireWire Record/Playback Option Card 18 pagina's.
Pagina afdrukkenGently slide the card into the expansion slot. Make sure it is
8
oriented right-side up.
Installing the FWx card in the FOH Rack
When the card is seated in its slot, secure it to the FOH chas-
9
sis with the mounting screw at the end of the FWx mounting
bracket (accessible from the open front panel of the FOH
Rack).
Secure the FWx card to the back panel of the FOH Rack us-
10
ing the two screws that held the faceplate.
FWx
card
Securing the FWx Card to the back panel of the FOH Rack
Attach an available internal power cable plug to the power
11
socket on the FWx card by holding the socket on the FWx and
pushing the plug firmly into the socket.
When the power cable plug is correctly attached to the FWx
card, the yellow wire should be the first wire from the left.
4
FWx Record/Playback Option Card
Attach the included ribbon cable to the ribbon connector
12
socket labelled "FireWire" on the first Mix Engine card (the
rear most card when viewed from the open front panel). Make
sure that the ribbon cable connector's notch is facing you
when attaching the connector.
Attaching the ribbon cable to the Mix Engine card
Attach the other end of the ribbon cable to the ribbon con-
13
nector socket on the FWx card. Make sure that the notch on
the ribbon cable connector is facing upwards when attaching
the cable.
Attaching the ribbon cable to the FWx card
Reattach the FOH Rack faceplate using its screws.
14
Reconnect power, audio, FOH Link, and any MIDI cables to
15
the FOH Rack.
Power on all system components. Proceed to "Confirming
16
FOH Rack FWx Card Installation" on page 5.