Axxess AX-MLOC725 Installatie-instructies

Blader online of download pdf Installatie-instructies voor {categorie_naam} Axxess AX-MLOC725. Axxess AX-MLOC725 2 pagina's.

The

Line Output Converter

or the output wires on an OEM amplifier of up to 150 watts per channel. These wires

can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the

input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

Yellow = battery +12v input

Black = ground input

Blue = remote +12v output the above power wires can be connected directly

to the amplifier being added

White = left front (+) input

White/Black = left front (-) input

Gray = right front (+) input

Gray/Black = right front (-) input

Black/White = reference ground (-) (reference ground optional if noise is present)

Note: Be sure that all audio input connections are polarized or in phase with each other.

That is, the positive output wires from the audio source need to be connected to the

corresponding positive input wires of the LOC. The same goes for the negative audio

wires. Failure to do this will result in poor bass response and low quality audio.

(Continued on other side)

INSTAX-MLOC725

AX-MLOC725

Installation Instructions

(LOC) should be installed on a stereo's speaker output wires