DigiDesign Mbox Basishandleiding - Pagina 9

Blader online of download pdf Basishandleiding voor {categorie_naam} DigiDesign Mbox. DigiDesign Mbox 20 pagina's. Version 6.7 for le systems on windows xp or mac os x

Pagina afdrukken
To use a keyboard or mixer with Mbox:
Plug your keyboard, mixer, or other audio
1
source into either the Source 1 or Source 2 input
on your Mbox. If your source is stereo (such as a
stereo keyboard or the stereo output from a
mixer), connect the left channel (often the
white plug) to Source 1, and right channel (of-
ten the red plug) to Source 2. The inputs are
numbered from the bottom up, so Source 1 is
the bottom input on the back of your Mbox.
Mbox configuration for stereo input
Do not plug any sound source into the 1/4-
inch jacks labeled "Inserts." These are not
inputs. They are special connectors for us-
ing an external effects processor (such as a
compressor or EQ).
On the front of Mbox, set the source to Line
2
(line level) by pressing the Source selector until
the Line LED is lit.
3
trol fully left to Input.
Source selector and Gain control for the Source 1 input
4
level. For example, the optimal level for most
Source 2 input
keyboards is between 80% and 100% of maxi-
(right channel)
mum volume.
Source 1 input
(left channel)
5
Gain control to the right to increase the input
level of your keyboard.
On the front of the Mbox, turn the Mix con-
Line LED
Source
selector
Gain (level) control
Set your instrument's volume to its optimal
On the front of the Mbox, carefully turn the
7
Connecting Instruments