Epson AcuLaser CX11NF Start hier Handleiding - Pagina 5

Blader online of download pdf Start hier Handleiding voor {categorie_naam} Epson AcuLaser CX11NF. Epson AcuLaser CX11NF 8 pagina's. Multi-function colour laser printers
Ook voor Epson AcuLaser CX11NF: Basisbediening Gude (26 pagina's), Gebruikershandleiding (17 pagina's), Specificaties (4 pagina's), Installatiehandleiding (32 pagina's), Specificaties (2 pagina's), Aanvullende handleiding (6 pagina's), Update (1 pagina's), Product ondersteunings bulletin (5 pagina's), Specificaties (4 pagina's)

Pagina afdrukken
Epson AcuLaser CX11NF Start hier Handleiding
6
Click Install. The software is
installed. Wait for the installer to
install all the selected programs.
Note: If you are asked to restart your
computer, click No.
7
When you see this screen, connect the square end
of your USB cable to the back of the CX11N and the
flat end of the USB cable to your computer. (You can
connect to any open port.)
8
Select your country or region, then click OK.
9
When you are done installing the software,
the registration screen appears. Follow the
on-screen instructions to register your product.
10
Click Restart Now.
Note: If you see a message after
restarting your computer indicating
the Event Manager is blocked, click
Unblock.
You are ready to print, copy, and scan.
Macintosh
®
1
Connect the square end of your USB cable to the back
of the CX11N and the flat end of the USB cable to your
computer.
2
Insert the Epson CD-ROM into the CD drive of your
computer. Double-click the EPSON icon.
3
Make sure you close all other applications.
When you see the following screen, click
Continue.
4
Read the license agreement that
appears and click Agree.
5
For the type of installation,
select Local.
6
Click Install. The software is
installed. Wait for the installer to
install all the selected programs.
7
When you are done installing the
software, the registration screen
appears. Follow the on-screen
instructions to register your product.
8
Click Restart Now.
9
Open the Applications folder,
then open the Utilities folder and
double-click Printer Setup Utility
(OS X 10.3.x or 10.4.x) or
Print Center (OS X 10.2.x).
10
Click the Add button.