Arcflash Labs EMG-02 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Arcflash Labs EMG-02. Arcflash Labs EMG-02 18 pagina's. 10 stage automatic coilgun
Pagina afdrukken
which allows it to return to its home position. It is important to ensure that no debris enters
the front or rear view ports as this could cause feeding issues.
2.3 Discharge resistor
Charging
cable
The discharge resistor is a large plate that can be seen under the vents of the barrel
which capacitor's energy into heat when the gun is powered off, and also heats up when the
gun is powered on. The DCL may heat to over 60
succession. While there is a hand guard to protect the user from the elevated temperature of
the discharge resistor, it is important to consider the temperature of the discharge resistor in
hot environments or when toggling the main switch as temperatures over 100
damage to the polymer barrel structure.
2.4 Main fuse
The main fuse of the EMG-02 is a 40A automotive fuse which acts as a protection
against certain types of over-current. If the gun shuts down and fails to restart, a user may
attempt to replace the fuse if it has blown. As with all electronic devices: make sure the power
is switched off before inserting the fuse or battery.
3/32" hex bolts
o
C if the gun is powered off or on in rapid
Charging cable pass-through
Fuse
Discharge resistor
o
C may cause
(Fuse cover removed)
7 |
P a g e