Epson AL-M200 Series Installatiehandleiding - Pagina 30
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson AL-M200 Series. Epson AL-M200 Series 40 pagina's. Wireless network setup guide
Ook voor Epson AL-M200 Series: Installatiehandleiding (2 pagina's)
Pagina afdrukken
8. If SSID selection screen appears, select the SSID, and then press the
9. Enter the PIN code of the printer at the web page of the wireless access point.
10. Wait a few minutes until the printer restarts to establish the wireless network.
11. Print a System Settings page from the operator panel.
For more information, see the User's Guide.
12. Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.
Note:
When "Link Quality" is "No Reception", check if the wireless settings are correctly configured.
Ad Hoc Setting on the Operator Panel
To configure the wireless settings for an ad-hoc connection where the wireless devices communicate
directly with each other without an access point:
1. On the operator panel, press the
2. Select Admin Menu, and then press the
3. Select Network, and then press the
4. Select Wi-Fi Setup, and then press the
5. Select the desired access point, and then press the
If the desired access point does not appear:
a Select Manual Setup, and then press the
b Enter the SSID, and then press the
Use the
or
cursor.
c Select Ad-hoc, and then press the
d Select an encryption type, and then press the
(Menu) button.
button.
button.
button.
button to enter the desired value, and press the
button.
AL-M200 Series
button.
button.
button.
button.
Wireless Network Setup Guide
Wireless Network Setup Guide
button.
or
button to move a
30