ayas DRAF-250-2K-M Gebruiksaanwijzing & garantie - Pagina 12

Blader online of download pdf Gebruiksaanwijzing & garantie voor {categorie_naam} ayas DRAF-250-2K-M. ayas DRAF-250-2K-M 18 pagina's. Axial fan

ASSEMBLY DIAGRAM

Kaynak makinesi, ısıtma-soğutma cihazları vb.

Welding machines, cooling-heating devices etc.

 For assembly, a hole suitable for the product holes and dimensions is drilled in the place

to be mounted.

 Industrial type axial fans can be mounted on the wall or glass depending on the usage.

 If it is to be mounted on glass, it is recommended to use a supporting kit.

 Use insulation material during the assembly of the product.

 Connect the product to the mounting channel as shown in the figure.

 Make sure you have connected the power cable correctly as in the electrical diagram.

Connect the device poles with a disconnecting circuit breaker.

 Make sure to install according to the air direction as shown on the labels on the product.

 Make a trial run of the fan, check is there any vibration and error in the product.

 It sucks air from the engine part of the product and blows it from the front.

 It should be mounted in such a way that the engine stays inside to expel the air in your

environment, and the engine should be outside in order to use it to supply air inside.