Optional paper cutter: Cutting position accuracy: f3 mm (0.U')
Available cutting area:
Within 25.4 mm (1') below the perforation
at the top of the page
Electrical
Voltage:
103.5 to 132.0 VAC (12OV model)
198.0
Rated current:
7A (12OV model)
5A (220-240V model)
Power consumption:
200 watts (during self
mode)
Frequency:
49.5
Insulation resistance:
10 M
line
Dielectric strength
(between AC line and
12OV model can withstand
applied for one minute or 1.20 KV
applied for one second
220-240V model can withstand
applied for one minute or 1.50 KV rms
applied for one second
Environment
Temperature:
Operation:
Storage:
Humidity:
Operation:
Storage:
Applications Software
Most software programa let you specify the type of printer you are
using so that the program can take fuIl advantage of the printer's
features. If your application program haa an instalIation or setup
procedure that lets you sekt your printer from a ltt of printers,
choose the Epson DFX-8000 printer. If the list does not include the
DFX-8000, choose one of the following printers, listed in order of
preference:
DFX-5000
FX-1050 (FX-850)
FX-286e (FX-86e)
EX-1000 (EX-800)
FX-185 (FX-85)
FX-100+ (FX-80+)
FX-100 (FX-80)
9-Pin Printers
to 264.0 VAC (220-240V model)
printing in draft
test
60.5 Hz
to
ohms minimum (between AC
and chassis)
1.00 KV rms
to +95"F)
10% to 80% RH
without condensation
5% to 85% KH
without condensation
If these printers are not listed, select one of the following printers.
listed in order of preference:
FX
EX
LX
RX
MX
Epson printer
9-pin printer
Standard printer
Draft printer
If you plan to use IBM emulation mode, select one of the following
printers, listed in order of preference:
IBM Proprinter XL
IBM Graphics printer
power
IBM Printer
rms
KV rms
1.25
Lights
POWER @een)
On when the power switch is on and power is supplied to the
printer.
READY (green)
On when the printer is on line and ready to receive data from your
computer. This light flickers during printing.
PAPER OUT (red)
On when the printer is out of paper. This light go~e;~n~~;;;re;s
there is no paper positioned behind the print head.
paper loaded on the tractors in the standby position. (The printer
also beeps when it is out of paper.)
ON LINE (green)
On when the printer is on line and ready to receive and print data
from the computer. Also, when the print head overheats,
LINE light blinks. The printer stops printing, waits several minutes
while the print head cools, and then resumes printing.
TEAR Off (green)
On when the printer is in tear-off mode.
TOP OF FORM (green)
On when the printer is in top of form mode. When this light blinks,
you can adjust the loading and top of form positions.
PAPER SELECT (red/green)
The front tractor arrow goes on when the front tractor is selected.
The rear tractor arrow goes on when the rear tractor is selected.
The light is green when paper is loaded, even if
standby position, and red when the tractor is completely out of
paper.
5/23/90
DFX-8000 DOT-MATRIX PRINTER
ON
the
paper
the
is in the
DFX-8000-3
Pagina afdrukken