Aydin Displays VFP19R2 Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aydin Displays VFP19R2. Aydin Displays VFP19R2 20 pagina's. 19.0-inch amlcd flat panel color monitor, rack mount, panel mount, stainless steel & vesa mount models, touch options: resistive, capacitive, saw

Pagina afdrukken

Maintenance

4.1

Preventive Maintenance

The window and exterior surfaces may be cleaned with isopropyl alcohol followed by distilled water

rinse, applied with a soft cloth to avoid scratching the anti-reflective coating of the viewing window.

4.2

Troubleshooting (No Picture)

NO PICTURE:

• If the RED LED is lit, verify the FPD is powered on, verify that the signal

cable is properly connected to the display and computer.

• Verify video source is on.

IMAGE PERSISTENCE:

• Image persistence is when a "ghost" of an image remains on the screen

even after the monitor has been turned off. Unlike CRT monitors, LCD

monitors' image persistence is not permanent. To alleviate image

persistence, turn the monitor off for as long as an image was displayed. If

an image was on the monitor for one hour and a "ghost" of that image

remains, the monitor should be turned off for one hour to erase the

image.

IMAGE IS UNSTABLE, UNFOCUSED OR SWIMMING IS APPARENT:

• Signal cable (video) should be completely attached to the computer and

display.

• Use the OSM Image Adjust controls to focus and adjust display by

increasing or decreasing the FINE setting. When the display mode is

changed, the OSM Image Adjust settings may need to be re-adjusted.

DISPLAY IMAGE IS NOT SIZED PROPERLY:

• Use the OSM Image Adjust controls to increase or decrease the H. SIZE

setting.

CUSTOMER SERVICE CONTACT INFORMATION:

Customer Service and Technical Support

VFP19-901_manual.doc

Phone:

610-404-5370

E-mail:

[email protected]