CREE LIGHTING XSPM Demontage-instructies

Blader online of download pdf Demontage-instructies voor {categorie_naam} CREE LIGHTING XSPM. CREE LIGHTING XSPM 3 pagina's. Street lights

Models :

XSPM module

Light Source

codes

LEA#

XSPM#

Disassembly Instructions

Light Source (LS)

For End User (EU)

For Control Authority (CA)

N° DOC: DI121RLER0

Rev: 01

Power supply

codes

PH#

Warning: Before opening the appliance, remove voltage from the mains line

LS-EU

1.LED bars are not replaceable by the end user by construction; only a technical operator at the production site can re-

place these bars. In order not to compromise the functionality and performance of the luminaire, the light sources used

in it can be handled only in environments protected from possible contamination of dust and / or external chemical

agents and with safety measures to prevent possible electrostatic discharge caused by the handling of the same.The

connection of the light sources to the body of the luminaire is also made by means of double-sided thermo-conductive

which, if not properly installed, could cause incorrect thermal management of the light sources.

Tools:

LS-CA

1.Follow points A - B - C of paragraph PS-CA

2.Unscrew the 2 screws of the optics 3

3.Remove gaskets 4

4.Unscrew screws 5 that fix LED bars 6 on housing 1

5.Remove LED bars 6 without damaging the thermal pad 7

and taking the utmost care not to bend or damage the

LED bars

XSP Series

Street Lights

Includes: XSPM Luminaires

DISASSEMBLY INSTRUCTIONS

Latest release date: 18/11/2021