CREE LIGHTING Circular Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} CREE LIGHTING Circular. CREE LIGHTING Circular 3 pagina's. Street lights

Disassembly Instructions

Power Supply (PS)

For End User (EU)

For Control Authority (CA)

N° DOC: DI053RLER0

Rev: 01

PS-EU

a.Detach the retrofit plate 8 from the lantern structure (if any) by

unscrewing the four screws 9

b.Unscrew 10 screws to open wiring compartment 11

c.Unscrew the cable press 12

d.Disconnect the LED plate cables connected to driver 13 on its

terminal block 14

e.Unscrew screws 17 between the driver plate 15 and the plate

16 paying attention to the notched washers

f. Replace the old wiring plate with a new one

g.Screw screws 17 back on driver plate 15 and plate 16 via a tor-

que of 1 Nm

h.Reconnect the cables on driver 13 terminal block 14 (see atta-

ched wiring diagrams)

i. Close the wiring compartment 5 by tightening the screws 10 to

the torque of 1.2 Nm

j. Screw the cable press 12 back

PS-CA

A.Follow points "a-b-c-d" in paragraph PS-EU

B.Unscrew screws 18 that attach driver 13 to plate 15

C.Extract the driver

Latest release date: 18/11/2021