Digiflex RF160 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digiflex RF160. Digiflex RF160 8 pagina's. 2 channel smart rf wireless output module - 433mhz

Pagina afdrukken

RF160 Housing

The RF160 is housed in 3 piece plastic enclosure comprising a base plate , top cover and a terminal cover. The top

cover is fixed to the base using a Phillips head screw. The top cover needs to be removed to install the wire antenna.

The terminal cover is a press fit allowing easy removal. Once the wiring and programming has been completed the

cover should be reinstalled to help prevent the ingress of insects and other debris.

Remove

Terminal

Cover

Wall Mounting

A wall mounting tab is located on the inside of the top cover should you wish to locate the unit on a wall or other

structure. Once removed from the cover the tab slides and locks into the base plate as shown below.

Remove Mounting

Tab from underside

Page

P/N: RF160IRG Rev 1.0



of cover

Remove screw

in base

Lift cover

once screw in

base has been

removed

Push Mounting Tab into the

underside of base unit until

it locks into place.

E&OE