3Com OfficeConnect 3C1670108 Installatiehandleiding
Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3Com OfficeConnect 3C1670108. 3Com OfficeConnect 3C1670108 2 pagina's. With gigabit uplink
Installation Guide
OfficeConnect
®
Switch 8 with Gigabit Uplink
(3C1670108)
3Com Corporation, Corporate Headquarters, 5500 Great America Parkway, Santa Clara,
CA 95052-8145
Copyright © 2003 3Com Corporation. All rights reserved. 3Com, the 3Com logo, and
OfficeConnect are registered trademarks of 3Com Corporation.
Microsoft, MS-DOS and Windows are registered trademarks of Micorsoft Corporation.
All other company and product names may be trademarks of their respective companies.
Part No: DIA1670-108AAA01 Published: May 2003
INTRODUCTION
About This Guide:
Thank you for purchasing the OfficeConnect Switch 8 with Gigabit Uplink.
This high quality, Fast Ethernet Switch is an easy, efficient way of creating
a network or expanding an existing network. In addition, the Switch's
Gigabit Uplink port provides support for bandwidth intensive applications,
and allows high-speed connections to servers, and to the rest of the
network. An example configuration is shown in Figure 1.
The Switch is compact and attractively designed for desktop use. It can be
stacked with other units in the OfficeConnect family, which include
Cable/DSL gateways, wireless devices, and Fast Ethernet and Gigabit
Ethernet switches. The OfficeConnect family is a fully integrated system,
enabling you to share computer resources, and take advantage of new
technologies as your network grows.
Your Package Contains:
• OfficeConnect Switch
• Power adapter for use with the Switch
• Stacking clip
• Four rubber feet
• This Installation Guide
• Support and Safety Information sheet
• Warranty flyer
About This Guide
This guide will use the term Switch when referring to the OfficeConnect
Switch 8 with Gigabit Uplink.
ABOUT YOUR SWITCH
OfficeConnect Switch 8 with Gigabit Uplink - Front
1
2
Port Status
GbE
1
2
3
4
5
6
7
8
G b E
Blue = 1000M Green = 100M Yellow = 10M Flash = Activity
1 Power LED
4 Power Adapter Socket
Green
Only use the power adapter that is supplied with the
Switch.
Indicates that the Switch is powered on. If the LED is
off, but the Power Adapter OK LED is on, there may be
5 Power Adapter OK LED
a problem with the Switch's internal power supply.
Green
Refer to the Problem Solving section.
Indicates that the power adapter is supplying power to
2 Gigabit (GbE) and 10/100 Port Status LEDs
the Switch. If the LED is off, there may be a problem
Blue (1000 Mbps) / Green (100 Mbps link) /
with the power adapter or adapter cable (refer to the
Yellow (10 Mbps link)
Problem Solving section)
If the LED is on, the link between the port and the next
6 Gigabit (GbE) Port
piece of equipment is OK. If the LED is flashing, the
link is OK and data is being transmitted or received. If
7 10/100 Ports
the LED is off, nothing is connected or the connected
Use suitable TP cable with RJ-45 connectors. You can
device is turned off, or there is a problem with the
connect your Switch to a workstation, or any other
connection (refer to the Problem Solving section).
piece of equipment that has 10BASE-T/100BASE-TX
connectivity (all ports), or 10BASE-T/100BASE-TX/
3 Duplex LEDs
1000BASE-T connectivity (Gigabit Port only).
Yellow
Each 10/100 Port is capable of autosensing for 10 Mbps
If the LED is lit, the port is in full duplex mode. If the
or 100 Mbps operation. The Gigabit Port is capable of
LED is off, the port is in half duplex mode.
autosensing for 10 Mbps, 100 Mbps or 1000 Mbps
operation.
DIMENSIONS AND STANDARDS
Dimensions and Operating Conditions
Standards
Functional:
ISO 8802/3, IEEE 802.3, 802.3u
Safety:
UL 60950, EN 60950, CSA 22.2 #60950, IEC60950
EMC:
EN 55022 Class B, EN 55024, FCC Part 15 Class B*
ICES-003 Class B, CNS 13438 Class A
Environmental: EN 60068 (IEC 68)
* Refer to Regulatory Notices in the Support and Safety Information sheet.
Switch 8 with Gigabit
Uplink 8.5W,
29 BTU/hr power
requirement
0 to 40ºC (32 to 105ºF)
operating
temperature
0 to 95%
(non-condensing)
humidity
Width:
225 mm (8.86 in.)
Height:
35.4 mm (1.39 in.)
OfficeConnect Switch 8 with Gigabit Uplink - Rear
3
3C1670108
Duplex
On = Full
1
2
3
4
5
6
7
8
OfficeConnect Switch 8 with Gigabit Uplink
All ports have an automatic MDI/MDIX feature, which
means either straight-through or crossover cable can be
used to connect to any port.
These are shielded RJ-45 data sockets. They cannot be
used as standard traditional telephone sockets, or to
connect the unit to a traditional PBX or public telephone
network. Only connect RJ-45 data connectors, network
telephony systems, or network telephones to these
sockets.
Either shielded or unshielded data cables with shielded or
unshielded jacks can be connected to these data sockets.
Diese Portes sind geschützte Datensteckdosen. Sie dürfen
weder wie normale traditionelle Telefonsteckdosen noch
für die Verbindung der Einheit mit einem traditionellenm
privatenm oder öffentlichenm Telefonnetzwerk gebraucht
werden. Nur RJ-45- Datenansclußhlüsse,
Telefonnetzsysteme oder Netztelefone an diese
Steckdosen anschließen.
CONFIGURATION
Workstation requiring
High Bandwidth Connection
1000 Mbps Connections
Depth:
135.4 mm (5.33 in.)
10/100 Mbps Connections
OfficeConnect Switch 8 with
Figure 1 Network showing sample configuration with
Gigabit Uplink
OfficeConnect Switch 8 with Gigabit Uplink.
0.6 Kg (1.3 lb)
4
5
6
8
OK
GbE
Entweder geschützte oder ungeschützte Buchsen dürfen
an diese Datensteckdosen angeschlossen werden.
AVERTISSEMENT : Prises RJ-45 blindées.
WARNING: RJ-45 ports.
Ces prises ne peuvent servir comme prises téléphone
standard et ne permettent pas la connexion de l'appareil
à un système PBX ni à un réseau téléphonique public. N'y
branchez que des prises RJ-45 mâles adaptées, ou des
systèmes de réseaux téléphoniques. Il est possible d'y
brancher des câbles blindés ou non comportant des prises
de type Jack (blindées ou non).
VORSICHT: RJ-45-Portes.
Server
OfficeConnect
Powe
r
Gigabit Switch 5
Alert
OfficeConnect Switch 8
with Gigabit Uplink
7
1