Creo iQsmart 2 Gebruiksaanwijzing Addendum - Pagina 14

Blader online of download pdf Gebruiksaanwijzing Addendum voor {categorie_naam} Creo iQsmart 2. Creo iQsmart 2 16 pagina's.

Mounting Originals

Defining user defined format

The user-defined formats must be defined in the application before you

can use them. With the mask you prepared previously mounted in the

scanner, follow the procedure described below for transparency and

reflective.

1. 1. 1. 1.

In the Setup dialog box, choose the All Board format.

2. 2. 2. 2.

Perform Preview.

The Preview display window shows the entire mask. In

transparency, the prepared windows are shown. In reflective, the

taped originals are shown.

3. 3. 3. 3.

Crop each window/original in the Preview display window.

The system automatically adds 1.5 mm around your crops.

From the File menu, choose Save User Defined. The Save User

4. 4. 4. 4.

Defined menu appears.

5. 5. 5. 5.

From the Save User Defined menu, choose an option, depending

on the format you want to define.

6. 6. 6. 6.

In the window that appears, enter the name of the new user defined

format.

If you define a new format under an existing format name, the new

format replaces the previous one. To delete a user format, delete

the format file from the EverSmart Tables folder.

Using user defined formats

When using the mask for transparencies, make sure the originals are

taped to their windows, emulsion side down.

After application restart, the user-defined formats appear in the Format

options in the Setup dialog box. Select the desired format when

scanning according to this format.

Refer to Chapter 4 Basic Scan on page 51 for details on the scan procedure.